Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production
제품 세부정보
| 유형: | 자연 순환 | 구조: | 소방관 및 수관 |
|---|---|---|---|
| 압력: | 낮은 / 고압 | 증기 생산: | 최대 60t/h |
| 스타일: | 수직의 | 연료: | 화력 |
| 산출: | 뜨거운 물 / 증기 | 표면 처리: | 그린 |
| 베어 파이프 OD: | 25-1650 mm | 베어 파이프 두께: | 2-40 mm |
| 핀 두께: | 0.6-3.0mm | 핀 높이: | 5-30 mm |
| 핀 튜브 피치: | 5-30 mm | 핀 튜브 길이: | ≤12000 mm |
| 재료: | 탄소강, 합금, 오스테 나이트 스틸 | ||
| 강조하다 |
Max 60t/h Steam Production Boiler Economizer,Low High Pressure Boiler Economizer,Finned Tubes Boiler Economizer |
||
제품 설명
| Name (unit) | Specification (mm) |
|---|---|
| Bare pipe (OD) | 25-1650 |
| Bare pipe (Thickness) | 2-40 |
| Fin (Thickness) | 0.6-3.0 |
| Fin (Height) | 5-30 |
| Fin tube thread pitch | 5-30 |
| Fin tube length | ≤12000 |
- Impact test and Strength calculation report with applied materials information
- 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure quality
- Hydraulic test report to ensure standard working pressure and safety
제품 하이라이트
Low / High Pressure Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes Boiler Economizer Introduction The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. It ...
고압 전력 보일러 온난화 표면 막 벽 아르곤 활 용접 바이오매스 보일러
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
전기 발전소 보일러에 대한 고주파 웰딩 H 핀 튜브 경제자 ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
탄소 강철 SA192 초열 코일 아르곤 아크 용접 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
보일러 산업용 SA210A1 철강 보일러 경제화 열 교환 부품 ASME 인증
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
아래의 온라인 문의 연락 양식을 사용하시기 바랍니다. 질문이 있으시면 저희 팀이 가능한 한 빨리 연락합니다.
