logo
  • 품질 자연 순환과 미분탄 보일러를 위한 합금 강 과열기와 재열기 공장

    자연 순환과 미분탄 보일러를 위한 합금 강 과열기와 재열기

    Alloy Steel Superheater And Reheater For Pulverized Coal Boilers With Natural Circulation Description In general, steam heated in high pressure superheater is named superheated vapour, the steam heated by reheater is called reheated vapour. The parameter of reheated steam is relating with economy of thermal circulation. Generally, the pressure of reheated steam is about one fifth of that of superheated steam, and the temperature of the former is almost the same as that of the

  • 품질 산업용 보일러를 위한 금속 소모 감소 과열기와 재열기 공장

    산업용 보일러를 위한 금속 소모 감소 과열기와 재열기

    Boiler Superheater and Reheater Description The function of Super heater in the thermal power plant is to remove the last traces of moisture from the saturated steam coming out of boiler and to increase its temperature above saturation temperature as per requirement at inlet of steam turbine. Details • Superheating raises overall efficiency as well as avoids too much condensation in last stages of turbine which avoids blade erosion. • The heat of combustion gases from furnace

  • 품질 스테인레스 강 ASME 보일러 예비품 과열기와 재열기 공장

    스테인레스 강 ASME 보일러 예비품 과열기와 재열기

    Middle/High Temperature Stainless Steel Superheater/Reheater Coil Tube Boiler Spare Parts Functions and characteristics Superheaters and reheaters are important parts for the heating surfaces, used to increase steam temperature, aiming to improve steam enthalpy and further to increase the thermal circulation efficiency for power station. Superheaters work to heat surnatured steam to superheated steam with a certain tempetature. When boiler loads or other working conditions

  • 품질 ASME / GB 기준에 탄소강 저온 보일러 과열기 공장

    ASME / GB 기준에 탄소강 저온 보일러 과열기

    Carbon Steel Low Temperature Superheater and Reheater Tube Coils for Heat Exchanger and Vessels of Boiler System Working characteristics of superheaters and reheaters: To improve the thermal efficiency, the pressure of superheated steam have been increased from superhigh pressure to subcritical and supercritical pressure. But limited by the metal performance, the steam temperature of superheaters and reheates are kept within 540-555 degrees. Because what flow through tubes of

  • 품질 석탄 연소 보일러를 위한 보일러부로서의 스테인레스 강 과열기와 재열기 튜브 코일 공장

    석탄 연소 보일러를 위한 보일러부로서의 스테인레스 강 과열기와 재열기 튜브 코일

    Stainless Steel Superheater and Reheater Tube Coils for Heat Exchanger and Vessels of Boiler System Summary For power plant boiler, it is a crucial way to increase thermal economy of thermal power station by improving parameter of superheated steam. The increase of superheated steam parameters are limited by metal materials. The design of superheaters must make sure that the temperature of outer wall of heating surface pipes is lower than allowable temperature of oxidation

  • 품질 시멘트 산업과 다른 산업을 위한 탄소강 보일러 과열기 공장

    시멘트 산업과 다른 산업을 위한 탄소강 보일러 과열기

    Carbon Steel Boiler Serpentine Pipe Heating Pipe for Cement Industry Superheater&Reheater, Custom Component For Boiler A superheater is a component that heats saturated steam in an industrial boiler, turning it into superheated steam. Our superheater guarantees that the superheated steam temperature will fluctuate to within an allowable range (normally varies from 540°C to 500°C)when the boiler is over loaded. Functions: 1. Superheater is a kind of equipment which can heat

  • 품질 탄소강 석탄은 ASME / GB 표준에 CFB 보일러 과열기를 발포했습니다 공장

    탄소강 석탄은 ASME / GB 표준에 CFB 보일러 과열기를 발포했습니다

    Carbon Steel Boiler Superheater for Coal- Fired CFB Boiler in ASME Standard​ Working Principle Superheater is the part that heats the steam from the saturation temperature to the superheater by the boiler. It is also called the superheater. Superheater can be divided into convection type, radiant type and semi-radiant type according to heat transfer mode; According to the characteristics of the structure, it can be divided into serpentine tube type, screen type, wall type and

  • 품질 동력화차 보일러와 쓰레기 소각장을 위한 ASME 표준 스테인레스 강 보일러 과열기 공장

    동력화차 보일러와 쓰레기 소각장을 위한 ASME 표준 스테인레스 강 보일러 과열기

    ASME Standard Stainless Steel Boiler Superheater for Power Station Boilers Superheater A superheater is a component that heats saturated steam in an industrial boiler, turning it into superheated steam. Our superheater guarantees that the superheated steam temperature will fluctuate to within an allowable range (normally varies from 540°C to 500°C)when the boiler is over loaded. Super heater types: The outside diameter of the pipe is generally 30-60mm. The convection